FD 200-25 427 Contitech Air Spring Shock Absorber Triangle 6332 Bellows 4427

FD 200-25 427 Contitech Air Spring Shock Absorber Triangle 6332 Bellows 4427

AIRSUSTECH 2B6945 Cross OEM Original Equipment Manufacturer:

Triangular spring: 4427
Firestone: 6945
Kandi Technology: 64550
Leadwell: 1003586945C
Batman: 10-96945
UCF/Impex: AB-2B9-253
Taiwan distributor: AB6945
Dallas Spring: AS6945
Midland/Haldex: CS209253
Euclid/Meritor Aftermarket: E-FS6945
Kandi Technology: FD200-25427
Euclid/Meritor Aftermarket: FS6945
Leyland: SC2125

AIRSUSTECH 2B6945 Specifications and Detail Technical Parameters

❶Nut/blind nut
Top plate screw (nut) teeth: 2X1/2-16UNC
The screw center distance of the top cover plate: 89 mm
Screw (nut) teeth of the bottom cover plate: 2X3/8-16UNC
The screw center distance of the bottom cover plate: 89 mm
❷Air hole/air inlet/air fittings
Air hole/air inlet: 1/4 NPT
Screw center distance between air hole and nut: 44 mm
❸Cover plate
Top plate diameter: 160 mm
Diameter of the bottom cover: 160 mm
Bell rubber bellows
Maximum diameter of rubber bellows: 262 mm
Natural diameter of rubber bellows:240 mm
Working stroke: minimum 95 mm to maximum 325 mm
Maximum height: 325 mm
Minimum height: 95 mm
Stroke height: 230 mm
❺Bumper block/bumper block
No bumper block
❻Belt loop/Belt loop
There is a belt hoop: a belt hoop

Top Plate Holes/Studs: 3
Bottom Plate Holes/Studs: 2
Top Plate Diameter: 6.4
Bottom Plate Diameter: 6.4
Folded Height: 3.8
Flexible Members: 578-92-3-206
Goodyear Trim: 2B9253

AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs product description:

The air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded

• In order to press the air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs to the minimum height, a restoring force is required. Usually, this is achieved by applying a load

• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs must be used to absorb the force

• Before disassembling the air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs , the internal air must be released to prevent accidents and personal injury.

• During operation, the rubber air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs shall not be in contact with other parts

FD 200-25 427 Contitech Air Spring

Triangle 6332 Contitech Air Spring

FD 200-25 427 Contitech Air Spring Shock Absorber Triangle 6332 Bellows 4427 Images